OCH145A Description/概述:
The OCH145A is a unipolar hall effect switch sensor,which is for contact less switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-drain output. The bandgap regulator allows a wide operating voltage range.
OCH145A is rated for operating temperature range from -40°C to 150°C and voltage range from 2.7V to 24V.
OCH145A是一種單極霍爾效應開關傳感器,用于少接觸開關應用。該設備包括一個用于磁傳感的片上霍爾電壓發生器,一個放大霍爾電壓的放大器,一個用于為噪聲抑制提供開關滯后的施密特觸發器,以及一個開漏極輸出。帶隙調節器允許一個廣泛的工作電壓范圍。
OCH145A的額定工作溫度范圍為-40°C到150°C,電壓范圍為2.7V到24V。
OCH145A FeaturesFeatures/特性:
Wide operating voltage range: 2.7V~24V
Operating Temperature: -40℃~+150℃
Maximum output sink current: 25mA
Reverse polarity protection
Open-Drain pre-driver output
Package: SIP-3L、SOT23-3L
OCH145A Applications/應用:
RPM Detection
Speed measurement
Non-Contact Switch
Position Control
Revolution Detection
Textile Control System
OCH145A Pin Configuration:
OCH145A Application Circuit:
OCH145A Block Diagram:
CST145A Hall Sensor Location: