CST2335 Description:
The CST2335 is synchronous converters with an input-voltage range of 6V to 30V. It has an integrated low-side switching FET that eliminates the need for an external diode which reduces component count. Efficiency is maximized through the integrated 85-mΩ and 60-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well regulated voltage reference that is 1.5% over temperature.Cycle-by-cycle current limiting on the high-side MOSFET protects the CST2335 in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current.Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time.
CST2335 Features:
Wide Input Voltage Range: 6V ~ 30V
3.5A output current capability
Fixed 500KHz Switching Frequency
Output Adjustable from 0.925V
Internal Soft start
Built-in Over Current Limit
No Schottky Diode Required
Under Voltage Protection
Over Voltage Protection
Over Current Protection
Short Circuit Protection
Over Thermal Protection
Available in ESOP8 Package
-40°C to +85°C Temperature Range
CST2335 Application:
Automotive Systems
Security Monitoring Camera
Network Terminal Equipment
Industrial Power Systems
CST2335 Application Circuits:
CST2335 Pin Configuration:
CST2335 Pin Description:
CST2335 Order Information:
Model
|
Marking
|
Description
|
Package
|
T/R Qty
|
CST2335
|
****
|
ST2335 Synchronous Step-Down Regulator; 30V,3.5A,500KHz, VFB 0.925V |
ESOP-8
|
3,000 PCS
|
CST2335 Function Block Diagram: