CST30XXA series (CST3006A/CST3011A/CST3020A/CST3040A/CST3080A) General Descriptions:
CST30XXA series (CST3006A/CST11A/CST3020A/CST3040A/CST3080A) series are 4-bits micro-controller which could play 1 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They include a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 4.096 (±3%) MHz. This chip operates over a wide voltage range of 1.5V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. The program ROM is 4K words and data ROM size is 248K bytes. The maximum working SRAM is (96+2) nibbles. It is provided with total 4 software programmable I/O Ports and a 13 levels low voltage detector (LVD).
CST30XXA series (CST3006A/CST3011A/CST3020A/CST3040A/CST3080A) Features:
* Operating voltage: 1.5V to 5.5V
* MCU Operation frequency: 4.096 MHz
* Memory Size
- Program ROM size: 4K words OTP type
- Data ROM size: 248K bytes OTP type
- SRAM size: 96*4 bits
- User register: 2*4 bits
* Wakeup function for power-down mode:
- HALT mode wakeup source: Port A can wake up from HALT mode to NORMAL mode and executing wakeup sub-routine program.
* 2 input/output pins: Port A0 and A1 can be defined as input or output port bit by bit.
* Three reset condition:
- Low voltage reset. (LVR=1.5V)
- Power on reset.
- Watch dog timer overflow.
* One internal interrupt sources:
- PWM interrupt.
* WDT
- Watch dog timer, can enabled/disabled by option.
- WDT period is 0.128 second.
* Audio output:
- Support 8/10/12-bit PWM mode.
* Support option set for pull down resistor 1M, 50K Ohm, low voltage reset…etc.
* Oscillator fuse option ±3%, temperature & voltage compensation.
* Support security option (1 bit) for read inhibition.
* Support 13-levels LVD function.
CST30XXA series (CST3006A/CST3011A/CST3020A/CST3040A/CST3080A) provides SOP8:
CST30XXA series (CST3006A/CST3011A/CST3020A/CST3040A/CST3080A) Block Diagram:
CST30XXA series (CST3006A/CST3011A/CST3020A/CST3040A/CST3080A) The Application Circuit: