RM1233A Overview:
RM1233A is a single button touch detection chip, which is equipped with a built-in voltage stabilizing circuit to provide stable voltage for touch sensing circuits. The stable touch detection effect can widely meet the needs of different applications. This touch detection chip is specifically designed to replace traditional buttons, and the size of the touch detection PAD can be designed within a reasonable range according to different sensitivities, with low power consumption and wide working voltage, This is the characteristic of this touch chip in DC or AC applications.
RM1233A Features:
Working voltage 2.3V~5.5V
The built-in voltage regulator circuit provides stable voltage for the detection circuit to use
Built in Low Voltage Reset (LVR) function
Working current 6ua@vdd =3V, no load
Low power standby current 2ua@vdd =3V, no load
Flexibly adjustable sensitivity, no external capacitance required, maximum parasitic capacitance value of 30pF
Touch detection input pins connected in series with a 0-100K resistor can adjust sensitivity
The output mode has been configured, eliminating the need for external selection resistors
Optional CMOS output/open drain output, effective for high/low levels
The touch output pin provides a maximum output time of 16 seconds
After power on, there is a stable time of about 0.5 seconds
Automatic calibration function, environmental adaptive calibration function
DFN-6L, SOT23-6L packaging
RM1233A Application:
Various consumer products
Replace button buttons
RM1233A Selection table/ordering information:
Selection List
主型號(hào) RM1233A-KGSAx RM1233A-KGHAx
RM1233A-CGSBx
RM1233A-CGHBx
RM1233A-KDSAx
RM1233A-KDHA
RM1233A-CDSAx
RM1233A-CDHAx
RM1233A-CDSBx
RM1233A-CDHBx
|
Ordering Information List
產(chǎn)品型號(hào) RM1233A-KGSAx RM1233A-KGHAx
RM1233A-CGSBx
RM1233A-CGHBx
RM1233A-KDSAx
RM1233A-KDHA
RM1233A-CDSAx
RM1233A-CDHAx
RM1233A-CDSBx
RM1233A-CDHBx
|
RM1233A Chip Block Diagram:
RM1233A Pin configuration:
RM1233A Application Circuit: