IP5320概述：
The IP5320 is a multi-function power management SOC that integrates a boost converter, lithium battery charge management, and battery level indication, providing a complete power solution for the digital tube display mobile power supply.
The high integration and rich functions of the IP5320 make it require few peripheral devices in application, and effectively reduce the size of the overall solution and reduce the BOM cost.
The IP5320 requires only one inductor to achieve buck and boost functions. Can support low cost inductors and capacitors.
The IP5320‘s synchronous boost system provides rated 3A output current with a conversion efficiency of up to 95%. When unloaded, it automatically enters the sleep state, and the static current is reduced to less than 150uA.
The IP5320 uses switch charging technology to provide rated 3A charging current and charge efficiency up to 93%. The built-in IC temperature and input voltage intelligently regulate the charging current.
The IP5320 has a built-in 10-bit ADC with a built-in current sampling circuit to accurately measure battery voltage and current. IP5320 built-in power calculation method, can accurately obtain the battery power information. Battery capacity can be set to accurately display battery power.
IP5320 support 1/2/3/4 LED power display, support 88, 188 and other digital tube power display; Support lighting function; Buttons are supported.
The IP5320 supports the I2C control interface.
IP5320 Features:
Synchronous switch charge and discharge
3A synchronous boost conversion, 3A synchronous switch charging
The maximum boost efficiency is 95%
Charging efficiency up to 93%
Built-in power path management, can be customized to support charging while discharging
Support output line supplement
charging
Automatically adjust the charging current to match the output capacity of the adapter
Supports VBUS 3A and VIN 2A charging
Support 4.20V, 4.30V, 4.35V and 4.4V batteries
Battery display
Built-in 10bit ADC and coulometer
Support 1/2/3/4 LED power display
Support 88, 188 and other digital tube power display
Intelligent recognition of LED light patterns and digital tubes
Rich in function
Built-in lighting drive
Supports the NTC function
Automatic detection of load insertion/removal
Integrates TYPE-C DRP protocol and supports single-port input and output
Integrated mobile phone charging current intelligent identification DCP
Low power consumption
Intelligent identification of load out, automatic standby
Standby power consumption less than 150µA
Minimal BOM
Power MOS built-in, 2.2uH single inductance for charge and discharge
Built-in a variety of digital tube drive circuit
Multiple protection, high reliability
Output over current, over voltage, short circuit protection
Input overvoltage, overcharge, and overcurrent protection
Overtemperature protection for the whole machine
Vin transient voltage resistance up to 16V
ESD 4KV
Deep customization
Flexible and low-cost customized solutions
Package QFN28 4mm*4mm
IP5320 Application:
Mobile power/power bank
Mobile phones, tablets and other portable devices
IP5320典型應用：
IP5320引腳定義：
IP5320 IC 印字說明：
IP5320 內部結構框圖：
IP5320典型應用原理圖：
Business consulting
13823761625
Mail me