精品国产sm全部网站免费_日韩精品毛片_推荐高清免费不卡网站_亚洲无码人成电影在线观看_一本伊大人香蕉久久網手機_福利视频你懂得_亚洲欧美曰韩在线_成年男女免费网站点播_成年人播放一级片高清_亚洲视频在线视频

Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> Charge manageme... >> Linear charge m...

Linear charge management

YT4057

    YT4057 is a linear lithium-ion battery linear charger with a complete trickle/constant current/constant voltage three-stage charging mode. Its input/output port has a voltage tolerance of up to 10.5V, making the YT4057 suitable for a variety of USB power supply and adapter power supply operating environments. Due to the internal PMOSFET architecture and anti-reverse charging circuit, external detection resistors and isolation diodes are not required. The thermal feedback adjusts the charging current to limit the chip temperature during high-power operation or high ambient temperatures.
    The charging voltage is limited to 4.2V and the charging current is regulated by an external resistor. After reaching the target charging voltage, when the charging current is reduced to 1/10 of the set value, the YT4057 will automatically end the charging process. When the input voltage (AC adapter or USB power supply) is removed, the YT4057 automatically enters a low current state, reducing the battery leakage current to less than 2uA. The YT4057 can also be set to stop operation, so that the power supply current is reduced to 35μA.
    YT4057 built-in anti-reverse connection function, in the lithium battery reverse connection to ensure that the IC will not be broken down resulting in battery self-discharge accidents.
    Other features include: charge current monitoring, undervoltage latching, automatic recharging and full and start charging signs.
    YT4057 summarize:
        YT4057 is a linear lithium-ion battery linear charger with a complete trickle/constant current/constant voltage three-stage charging mode. Its input/output port has a voltage tolerance of up to 10.5V, making the YT4057 suitable for a variety of USB power supply and adapter power supply operating environments. Due to the internal PMOSFET architecture and anti-reverse charging circuit, external detection resistors and isolation diodes are not required. The thermal feedback adjusts the charging current to limit the chip temperature during high-power operation or high ambient temperatures.
        The charging voltage is limited to 4.2V and the charging current is regulated by an external resistor. After reaching the target charging voltage, when the charging current is reduced to 1/10 of the set value, the YT4057 will automatically end the charging process. When the input voltage (AC adapter or USB power supply) is removed, the YT4057 automatically enters a low current state, reducing the battery leakage current to less than 2uA. The YT4057 can also be set to stop operation, so that the power supply current is reduced to 35μA.
        YT4057 built-in anti-reverse connection function, in the lithium battery reverse connection to ensure that the IC will not be broken down resulting in battery self-discharge accidents.
        Other features include: charge current monitoring, undervoltage latching, automatic recharging and full and start charging signs.

    YT4057 peculiarity:
    Programmable charging current up to 500mA.
    No MOSFETs, sensing resistors and blocking diodes required
    The small size enables complete linear charge management of lithium-ion batteries
    Constant current/voltage operation and heat regulation allow for maximum battery management efficiency without the risk of overheat
    Manage a single lithium-ion battery from a USB port
    The preset charging voltage is 4.2V±1%
    Charge current output monitoring
    Charging status Dual output, no battery and fault status display
    1/10 charge current terminated
    35μA current when stopped working
    2.9V trickle charging threshold voltage
    Soft start limits the surge current current
    Battery reverse protection

    YT4057 Apply:
    Lithium battery charger

    YT4057引腳排列及說明:


    YT4057功能框圖:

    YT4057典型應(yīng)用:
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products