ME4068 Overview:
ME4068 is a lithium battery charge management chip with constant current and constant voltage charging mode. A single (4.2V) lithium battery can be charged quickly and efficiently. The current mode PWM step-down switch control structure provides a small, simple and efficient solution for fast charging of lithium batteries.
ME4068 built-in anti-backflow function, so the practical application does not require the input end diode anti-backflow.
The ME4068 uses an external Sense resistor to set a highly accurate charge current, and an internal divider resistor and a precise reference voltage to set the battery‘s floating charge voltage to a single section (4.2V) with an accuracy of up to ±1%. When the input power is removed, the chip automatically enters low-current sleep mode, and the battery leakage current is as low as 3μA. When the charging cycle is over, if the voltage of a single battery drops to 4.1V, the chip will automatically re-charge the battery. The chip also has the function of charging timing protection, which automatically shuts off after 6 hours of charging.
ME4068 Features:
Input voltage range: 4.7V to 16V
Built-in anti-backfilling function
Built-in input adaptive function
Built-in soft start to prevent large current overshoot at the moment of power-on
High efficiency current mode PWM step-down switch control structure
±10% accuracy of charging current
A fixed switching frequency is used to ensure minimum noise
±1% accuracy of charging voltage
Automatic recharge
Charging timing function 6 hours
When the input power is removed, the system automatically enters hibernation mode
When the battery voltage is low, it automatically enters trickle charging mode
Low ESR ceramic capacitor output stability
Battery temperature detection
ME4068 Application:
Charging equipment
Portable laptop
Handheld device
ME4068 package form:
8-pin ESOP8
ME4068典型應用圖:
ME4068選購指南:
產品型號 |
產品說明 |
ME4068ASPG
|
VFLOAT =4.2V
|
ME4068產品腳位圖:
ME4068腳位功能說明:
ME4068芯片功能示意圖:
ME4068封裝信息: