BDR6170 DESCRIPTION:
The BDR6170 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H bridge driver, which consists of four N-channel MOSFETs that can control motors bi-directionally with up to 3.6-A peak current. The inputs can be pulse-width modulated (PWM) to control motor speed, using a choice of current-decay modes. Setting both inputs low enters a low-power sleep mode.
The device features integrated current regulation, based on the analog input VREF and the voltage on the ISEN pin, which is proportional to motor current through an external sense resistor.
The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage,especially for motor startup and stall conditions.
The device is fully protected from faults and short circuits, including under voltage (UVLO), overcurrent (OCP), and over temperature (TSD). When the fault condition is removed, the device automatically resumes normal operation.
Bdr6170 provides hsop8 package
Bdr6170 provides hsop8 package
BDR6170 FEATURES:
H-Bridge Motor Driver
– Drives One DC Motor, One Winding of a
Stepper Motor, or Other Loads
Wide 9-V to 36-V Operating Voltage
500-mΩ Typical RDS(on) (HS + LS)
3.6-A Peak Current Drive
PWM Control Interface
Integrated Current Regulation
Low-Power Sleep Mode
Small Package and Footprint
– 8-Pin HSOP With ThermalPAD
Integrated Protection Features
– VM Under voltage Lockout (UVLO)
– Across the Load Overcurrent Protection (OCP)
– Thermal Shutdown (TSD)
– Automatic Fault Recovery
BDR6170 APPLICATIONS:
Printers
Appliances
Industrial Equipment
Other Mechatronic Applications
BDR6170 BLOCK DIAGRAM"
BDR6170 PPLICATION CIRCUIT:
BDR6170 ORDER INFORMATION:
發(fā)送郵件
商務(wù)QQ客服
13823761625
