Parameters and Application of 24V DC Brushless Reduction Motor
Time:2023-11-15
Views:612
The 24V DC brushless reduction motor is a miniature deceleration micro drive motor, mainly composed of a DC brushless motor and a reduction gearbox assembly. Characteristics of DC brushless motor: The characteristic of DC brushless motor is that the waveform of the induced voltage between different 2-phases of the armature coil is roughly trapezoidal. The induced voltage waveform is formed by replacing the odd number of tone components on the first fundamental wave, except for the first component that is a multiple of 3. The induced voltage waveform is formed by the first fundamental wave, important 5th and 7th components. The total content X (=(as+a7)/a) of the voltage peaks as and a relative to the 5th and 7th components of the voltage peak a1 of the 1st fundamental wave Within the range of 0.01<X<0.1. The waveform of the induced voltage between two different phases in the armature coil is roughly trapezoidal.
24V DC brushless reducer motor parameters:
Product classification: DC brushless reduction motor
Product specifications: Φ 20MM product
Voltage: 24V
No load current: 220 mA (customizable)
Load speed: 2.4-1000 rpm (customizable)
Reduction ratio: 5/25/125/625:1 (customizable)
Product features: small size, light weight, high torque, low noise, ultra long service life, and not easily damaged.
Product application: Applied in multiple industries such as intelligent kitchen and bathroom, intelligent medical drive gearbox, automotive intelligent drive, intelligent home drive, industrial intelligent drive, electronic product intelligent drive, etc., solutions can be customized according to different customer needs.
Disclaimer: This article is transferred from other platforms and does not represent the views and positions of this site. If there is any infringement or objection, please contact us to delete it. thank you! |